VELFORM STYLE AND DRY PRO Notice D'utilisation page 4

ENGLISH
• Do not use an extension
cord with this device.
• Never block the air outlets
on the device or place it on a
soft surface, such as a bed or
sofa, where these outlets can
be blocked. Keep air outlets
free of fluff, hair and similar
objects.
• Do not use the device while
sleeping.
• Do not use the device
outdoors, where
(spray) products are being
used or where oxygen is
being administered.
• Never place or insert an
object in any inlet or tube.
• Velform® Style and Dry Pro
becomes hot with use, so do
not let hot surfaces come into
contact with the eyes or skin.
• If the power cable is
damaged, it must be replaced
by the
authorized
similarly qualified person in
order to avoid danger.
• This product can burn the eyes.
2. VELFORM® STYLE AND DRY PRO
VELFORM® STYLE
FEATURES
- 1,200 W
- Two air speed settings
- Three temperature settings
- Ergonomic design
- Soft touch grip
- Almost two metres of swivel cable
IONIC TECHNOLOGY
Provides body, volume and shine
1. Temperature selector
Move the button to cold, warm or hot.
2. Speed selector
Move the button to OFF (0), slow or fast.
3. Air outlet vent
Attach the accessory to the air outlet vent.
Do not insert objects into the air outlet vent.
4. Unlock buttons
Hold down both buttons to attach or remove
aerosol
manufacturer,
distributor
AND DRY PRO
the accessory.
5. Air vent
Keep hair and other objects away from the
air vent.
3. DIRECTIONS
For best results, use Velform® Style and Dry
Pro on damp, towel-dried hair
1. Plug the device into an outlet.
2. To attach the styling accessory you want
to use, line up the arrows on the accessory
and the Velform® Style and Dry Pro.
3. Press down the two unlock buttons on the
Velform® Style and Dry Pro and attach the
accessory.
4. Release the two buttons and the
accessory to ensure the brush is attached.
5. Turn on the device on fast or slow speed
and choose the temperature (cold, warm or
hot air) depending on the kind of hairstyle
you want.
6. When you finish, unplug Velform® Style
and Dry Pro and remove the accessory by
pulling on it while you press both unlock
buttons.
7. Unplug the device after use.
8. When the device has cooled down, store it
safely in its travel bag with the accessories.
NOTE: The product may be hot after use.
or
Before changing any accessory, wait
until it has cooled down.
CONCENTRATOR (A)
The concentrator accessory is used to finish
the drying process. It provides direct heat to
specific areas and helps you get tangles and
frizz under control.
If your hair is very wet before using Velform®
Style and Dry Pro, attach the concentrator
and use it at fast speed and hot temperature
to dry your hair before styling it.
When it is dry, use the other accessories for
best results.
VOLUME BOOSTER (B)
The volume booster accessory can be used
to lift the hair and provide volume from the
roots. When you want big hair with plenty
of body and a look that lasts all day, the
volume booster lets you create a long-lasting
hairstyle.
For volume and body, use the volume
booster under the hair and from the roots
with the Velform® Style and Dry Pro on fast
speed and hot temperature. For best results,