HAMPTON BAY VFB25ACLED1-5 Guide D'utilisation Et D'entretien page 11

Installation (continued)
8
Connect wiring from unit to switch
WARNING: To reduce the risk of electric shock, please
disconnect the electrical supply circuit to the fan before
installing light kit.
WARNING: Follow all local electrical and safety codes.
□ Connect box wires to switch wires using the quick
connect (AA) or wire nuts (not provided).
□ Connect the brown wire to the wire from the fan
switch.
□ Connect the blue wire to the wire from the main
light switch.
□ Connect the red wire to the wire from the night light
switch.
□ Connect the yellow wire to the wire from the switch
panel.
Product wires
ON/OFF
Switch panel
(purchase
separately) Switch box
Fan
Light
Night
light
CAUTION: Accessory part AA (quick connect) should be
installed per step 6. One quick connect should be used for
every wire connection.
AA
House wires
120 VAC
Line in
Unit box
Cable box cover
Conduit for wires
9
Grill attachment
□ Plug the connector into the receptacle.
□ Insert the mounting springs into the slots in the grill
assembly (E).
□ Squeeze springs together and insert into the main
body (A).
SHEET 10 TO 11 10
A
E