Troubleshooting Guide; Technical Specifications - Swann PRO Série Mode D'emploi

Problem: I can't see the camera on my TV.
Solution: Ensure the camera is plugged in and the TV or VCR is tuned to the
correct input channel.
Problem: When I view my camera at night I only see a bright spot and no image.
Solution: Night Vision will reflect when shining through a window. Move the
camera to the other side of the window or another location.
Problem: The BNC Extension Cable will not connect to my TV.
Solution: Connect the BNC to RCA adapter to the end of the Extension Cable
and plug into the TV.
Problem: On my Swann DVR, Video Loss appears where my camera should be.
Solution: Check the Extension cable is securely connected to the camera and
check the connection is secure on the back of the DVR. Also ensure the camera
has power by trying a second power outlet.

Technical Specifications

Video
Image Sensor
Video Quality
Number of Effective Pixels
Minimum Illumination
Day/Night mode
White Balance
Signal / Noise Ratio
Electronic Shutter
Gain Control
Backlight Compensation
Lens
Viewing Angle
Night Vision
Night Vision Distance
IR cut filter
Infra-red LEDs
Infra-red wavelength
Infra-red LED life
General
Indoor/Outdoor
Operating Power
Operating Temperature
Body Construction
Dimensions - PRO-560 Camera & Stand
Weight – PRO-560 Camera & Stand
Dimensions - PRO-550/580 Camera & Stand 3.2" x 2.3" x 2.8" / 58mm x 58mm x 70mm
Weight – PRO-550/580 Camera & Stand

Troubleshooting Guide

1/4" CCD
550: 420 TV Lines
560/580: 480 TV Lines
NTSC: 510 x 492 / PAL: 628 x 582
0 Lux (IR on)
Colour in lit area / Black & White at night
Automatic
> 50dB
1/60 - 1/100,000 NTSC / 1/50 - 1/100,000 PAL
Automatic
Yes
3.6mm
62 degrees
550: Up to 45ft/15m
560/580: Up to 65ft / 20m
No
12
850nm
10,000 hrs
Both
DC 12V
-4°F ~ 122°F / -20°C~ 50°C
Aluminum
2.0" x 2.0" x 2.8" / 50mm x 50mm x 70mm
10.5oz / 286g
10.5oz / 286g
7 7