Transmitter (Front) - Pioneer SE-DIR800C Mode D'emploi

01 Before you start

Transmitter (front)

1 Infrared transmitters
Infrared transmitters are located on either
side of the unit. Make sure there is an
unobstructed path from the transmitter to
your listening position.
2 DECODE indicators
Light to indicate the automatic decoding
mode for the current source:
2D: Dolby Digital
2PL II: Dolby Pro Logic II decoding of
analog or digital source.
DTS: DTS
3 DOLBY HEADPHONE mode indicators
Light to show the Dolby Headphone mode
(DH1 / DH2 / DH3).
10
En
4 DOLBY PRO LOGIC II mode indicators
Light to show the Dolby Pro Logic II mode
(AUTO / MOVIE / MUSIC).
5 INPUT mode indicators
The corresponding indicator lights up to
show the selected input mode (DIGITAL 1 /
DIGITAL 2 / ANALOG).
6 PHONES jack
Use for connecting corded headphones.