Introduction - AUDAC CPA12 Mode D'emploi

Introduction

This section briefly describes the possibilities of the CPA12 - 24 - 36 power amplifier.
T
he CPA12 - 24 - 36 was developed as an easy to use, flexible solution for multifunctional
use.
During the development of the CPA-series, the AUDAC-engineers wanted to achieve four goals:
- Delivering a flexible audio solution to control multiple functions
Offering a user-friendly device
-
Guaranteeing an excellent sound quality
-
- Creating a modern and advanced design
The CPA12 - 24 - 36 was designed for operation on AC Mains or DC 24V evacuations. Its
protection circuit protects it against current limiting, over current and overheating. The CPA-series
has a built-in high temperature detection, an auto muting function and one line input and one link
output with XLR jacks. These amplifiers are equipped with a low impedance (4 ) and constant
voltage (70V, 100V) output with EURO block terminal, a built-in 400Hz high-pass filter and a
power output of 120W for the CPA12; 240W for the CPA24 and 360W for the CPA36. They
have a frequency range of 40Hz to 16kHz ± 3dB, a low distortion and low noise level and an
adjustable input level (from -12dB to 0dB).
The CPA-series can be mounted in a 19 inch rack and can be expanded by adding a power
amplifier with LINK terminal.
These power amplifiers can be used in commercial as well as industrial applications such as
restaurants, hotels, shop floors, factories, warehouses, professional offices, public buildings, ...
5 5 5 5