Targus DEFCON Ultra Mode D'emploi page 5

Targus Notebook Security DEFCON
If you are setting the combination for the first time, enter
the preset combination 0000.
4 Press and firmly hold the combination set button
located next to the cable. Do not release the button
until AFTER you have set all four combination
dials to the new values.
NOTE: F
OR BEST RESULTS
AND THEN PRESS THE CABLE PLUG HEAD DOWN UNTIL YOU HEAR A
RELEASE THE BUTTON
.
UP
WARNING: Y
ON THE COMBINATION SET BUTTON UNTIL YOU HAVE ENTERED THE ENTIRE
COMBINATION NUMBER SEQUENCE
5 Using the dials, enter the new combination.
6 Release the combination set button, or pull the cable
plug head up, to save the new combination.
7 Record the combination in either the space provided
at the end of this guide or another secure, easy-to-find
place.
8 Test the combination BEFORE attaching the lock to
an item.
The combination is now set and your DEFCON Ultra is
ready for use.
,
PRESS AND HOLD THE COMBINATION SET BUTTON
,
PRESS THE TRIGGER AND PULL THE CABLE PLUG HEAD
OU MUST EITHER SECURE OR MAINTAIN CONSTANT PRESSURE
®
Ultra Combination Cable Lock
.
5
" ." T
CLICK O