Technical Data; Product Features; Intended Use - Leister HOT JET S Mode D'emploi

Technical Data

Voltage
Frequency
Power
Temperatur
Air flow (20°C)
Air pressure
Weight with cord (3 m)
Dimensions L x Ø
Protection class
Noise level L
pA

Product Features

1. Nozzle* 2. Screw 3. Pipe of the heating element 4. Connection for equipotential bonding 5. Unit stand
6. Rubber foot 7. Handle 8. Mains connection 9. Mains switch 10. Potentiometer for air volume control
11. Potentiometer for temperature adjustment 12. Air filter

Intended Use

When observing the safety instructions and using original Leister accessories, this hot air tool is suitable for all hot
air applications listed in these operating instructions.
Applications
Soldering and unsoldering of SMD and wired components.
Welding of thermoplastic polymers as well as individual elastoplastics in the shape of plates, pipes, profiles, seal-
ing material, coated fabrics, foils, foams, tiles and sheathing. The following welding procedures are possible:
Overlap, wire, band, and fusion welding
Shrinking of heat-shrinkable tubing or sleeves, foils, sheathing, solder connectors and form components.
Activating/dissolving solvent-free and hot-melt adhesives
Drying of moist surfaces
Mounting t he Nozzle*
Touching a hot nozzle can lead to serious burns. Before attaching or replacing a nozzle, allow the unit to cool
down completely or use a suitable tool.
A falling down nozzle can set an object on fire. Nozzles must be mounted firmly and secure on the unit.
A hot nozzle can set a surface on fire. Place down hot nozzles only on fire-proof surfaces.
An incorrect or defective nozzle can lead to heat accumulation and damage the unit. Use only original noz-
zles according to the table that are suitable for your unit.
Slide the nozzle 1 onto the heating-element tube 3 and tighten the screw 2.
* Nozzles not included in the delivery scope!
English - 9 -
[V] 100
[Hz]
50/60
[W]
[°C]
[°F]
[l/min]
[cfm]
[ ]
[g]
[lbs]
[mm]
[dB]
HOT-JET S
120
50/60
60
460
20 – 600
70 – 1100
20 – 80
0.7 – 2.8
1.3
235 x 70, Handle Ø 40
II/ (Double insulated)
59
230
50/60