Thetford 353 Série Mode D'emploi page 7

■
Adjust the rebate depth (1 = 4.5mm).
The surrounding surfaces must be able to withstand the allowable temperature rise
of 65˚C above ambient temperature, as specified in the EN 30-1-1 standard and in
accordance with the design of this unit.
The temperature of the surrounding surfaces may rise if there are other additional
devices besides the hob. Check the allowable temperature of the materials used for the
surrounding surfaces to ensure that they meet the requirements of EN 30-1-1, EN1949,
EN1645-1, EN1646-1, EN1647 and EN721.
■
Maintain the minimum distances between the burners and side, rear and overhanging parts.
1. Distance between edge of the burner and the side: min. 200mm
2. Distance between edge of the burner and the rear with glass lid fitted: min.110mm
3. Distance between burners and overhanging parts: min. 500mm
If you are unable to maintain these minimum distances, install fire-resistant material for
protection.
All combustible materials such as curtains and blinds must be kept well clear of the
appliance.
2
1
1
3
EN
5