Samsung DV52J8700E Serie Mode D'emploi page 32

Operations
02 Dry level
03 Temp.
04 Time
05 Digital graphic
display
06 Anti-Static
07 Rack Dry
English
32
DV8000J-03170S-03_EN-US.indd 32
Press to adjust the dryness in the Sensor Dry and Steam Dry
cycles. The corresponding indicator turns on.
• Larger or bulkier loads may require Very Dry or More Dry for
complete dryness.
• Less Dry is best suited for lightweight fabrics or for leaving
some moisture in the clothing at the end of the cycle.
• Damp Dry is designed to partially dry items. Use for items that
lay flat or hang to dry.
NOTE
This option is not available with STEAM SANITIZE, WOOL, and
ACTIVE WEAR.
Press to change the temperature of the current cycle.
• High: For sturdy cottons or those labeled Tumble Dry.
• Medium: For permanent press, synthetics, lightweight cottons,
or items labeled Tumble Dry Medium.
• Med Low: For heat lower than Medium. Use to dry synthetic or
washable knit fabrics.
• Low: For heat sensitive items labeled Tumble Dry Low or
Tumble Dry Warm.
• Extra Low: Provides the lowest heated drying temperature
possible.
Press to adjust the drying time for the Manual Dry cycles. This
is not available with the Sensor Dry cycles because the dryer
determines the drying time by sensing the current moisture level
of the load.
Displays all cycle information, including the cycle time,
information code, and operating status.
Reduces static electricity that occurs from clothing friction. This is
done by spraying steam in a later stage of the drying cycle.
NOTE
The Anti-Static function is only available with NORMAL, HEAVY
DUTY, PERM PRESS, DELICATES, and TIME DRY.
Rack Dry is available in TIME DRY. The temperature will be fixed
to Extra Low. For details, see "Drying rack".
2015/9/14 15:20:50