Device Description - Leister SILENCE Notice D'utilisation

Device description

1
2
Installation
• The device may only be installed by trained personnel.
• Installation size (view page 3 / 4.)
• Blower has to be mounted on installation stand (6) using four screws Ø M6.
• Protect blower from mechanical vibrations and shocks.
• Blower may be installed horizontally or vertically.
Operation
• Blower is designed for air inlet temperatures up to 200 °C.
• The blower must be connected by an electric engineer.
Pay attention to the direction of rotation!
• A suitable device for complete disconnection from the mains must
be provided in the mains connection!
• The appropriate connections should be made in the connection
box (4) depending on the voltage.
• For use in a dusty environment, a Leister stainless steel fi lter
should be fi tted onto the blower air intake (2).
1 Air outlet
3
2 Air intake
3 Motor
4 Connection box
5 Connection box lid
4
6 Installation stand
5
6
220 – 254 V 380 – 440 V 220 – 254 V
W2
U1
L1
Circuit diagram
in connection box lid (5)
U2 V2 W2 U2 V2
V1 W1 U1 V1 W1
L2 L3 L1 L2 L3
W2 U2 V2
U1 V1 W1
L1 N
13