IQAir Atem Mode D'emploi page 10

Take the connector end of the power adapter cord
(8) and snap into place. Replace the connector
cover. Press the power cord into the channel on the
stand head.
Snap in the power cord
connector
Press the cord into the stand
channel
Connect the stand head
to the stand base (5).
Once assembled, set the
stand upright.
Connecting the air purifier to the stand
Firmly grasp the air purifier and align with the stand
head (4). Tilt and affix the air purifier onto the stand
head. Snap the air purifier and stand together.
With your air purifier, diffuser and stand assembled,
you are now ready to use your Atem personal air
purifier.
Align the stand head
Product Use and Operation
Replace the connector cover
Connect the stand head
to the stand base
2
Angle and snap into place
EN
1
6