Anti-Tilting Kit; Adjusting The Feet - ROMMER CVH63 Notice D'utilisation

2.3 Anti-tilting kit

1
Anti-tilting
Bracket
(x1) (will be
attached to the
wall)
The document bag contains an
anti-tilting kit. Loosely attach the anti-
tilting bracket (1) to the wall using the
screw (2) and wall plug (3), following the
measurements shown in the figure and
table below. Adjust the height of the anti-
tilting bracket so that it lines up with the slot
on the cooker and tighten the screw. Push
the appliance towards the wall making sure
that the anti-tilting bracket is inserted into
the slot on the rear of the appliance.
A
Wall
Product Dimensions
(Width X Depth X Height) (Cm)
60x60x90 (Double Oven)
50x60x90 (Double Oven)
90x60x85
60x60x90
60x60x85
50x60x90
50x60x85
50x50x90
50x50x85

2.4 Adjusting the feet

Your product stands on four adjustable
feet. For safe operation, it is important that
your appliance is correctly balanced. Make
2
Screw (x1)
3
wall
plug (x1)
Anti-
tilting
bracket
B
A (mm) B (mm)
297.5
247.5
430 107
309.5 112
309.5
247.5 112
247.5
247.5 112
247.5
sure the appliance is level prior to cooking.
To increase the height of the appliance,
turn the feet anti-clockwise. To decrease
the height of the appliance, turn the feet
clockwise.
It is possible to raise the height of the
appliance up to 30 mm by adjusting the
feet. The appliance is heavy and we
recommend that a minimum of 2 people lift
it. Never drag the appliance.
52
52
64
64
64
EN - 12