Beper RI 701 Manuel D'instructions page 13

Cloth Dryer Use instructions
1.Firstly, make sure the clothes dryer is unplug and switched off.
2.place your laundry onto coat­hangers and hook them onto the clothes rack, spacing them out
evenly for best result. Each arm is designed to hold up to 3kg,but please do not exceed the maxi­
mum 10kg load.
3.unzip the outer cover and place it over the clothes .zip up the cover and make sure it is pulled well
down over the metal wind outlet. PLEASE NOTE: clothes will take much longer to dry it the cover
is not fully zipped.
4.Plug in and switch on the clothes dryer at the mains socket. To use the integral timer, turn the dial
clockwise to the desired time­minimum 1 mins ,maximum 180 mins. The power light will light up red.
5.To use the clothes dryer without timer, turn the dial anti clockwise to ON. The power light will light
red.
6.The fan will start working straight way, filling the outer cover with warm air to dry the clothes. Moist
air will escape through the ventilation holes on the top of the outer cover.
7.when the set drying time has elapsed, the clothes dryer will automatically shut off. The dial will
turn to OFF and the power light will go out. If using the clothes dryer without the timer, simply turn
the dial to OFF.
8.Switch off and unplug at the mains socket, then let everything cool down for a few moments be­
fore unzipping the cover and removing the hangers. Please take care in case the metal parts of the
hangers have become hot. CAUTION: keep your hands well away from the metal wind outlet as it
will be extremely hot.
9.Let the clothes dryer cool completely before storing it away.
TROUBLE SHOOTING
1.Clothes take too long time to dry
a. clothes too heavy or thick
b. Clothes not spin­dried or well­wrung
c. Outer cover not fully closed
2.Clothes dryer stops suddenly
a. Set drying time elapsed
b. Fan is blocked, which activates the safety cut­out, Switch off and unplug clothes dryer, and let it
cool completely before cleaning any blockages from fan vents and air intake holes on the underside
of the power unit
CARE AND CLEANING
The clothes dryer is designed be easily taken apart for compact storage after use. Always switch
off ,unplug and let the clothes dryer cool down completely before taking it apart and storing away.
Simply follow the steps in ASSEMBLING YOUR CLOTHES DRYER in reverse.
Always switch off and unplug the clothes dryer before cleaning and make sure it is completely cool.
wipe the parts with a damp cloth, then a dry cloth. Checking the fan vents and the air intake holes
on the underside of the power unit to make sure they are clear of blockage. The outer cover may be
washed below 40°C and tumble dried. CAUTION: never immerse the clothes dryer in water or any
other liquid.
13