Ebac 2000 Série Mode D'emploi page 59

CONTROL PANEL
1. Humidistat Increase
2. Humidistat Decrease
3. Fan Speed & Air Cleaning Control
4. Mode Button
5. Power On/Standby Indicator
6. Red Container Full Indicator
7. Fan Speed Indicator & Air Cleaning Indicator
8. Humidistat Setting Indicator
9. Smart Control Setting Indicator
Setting the controls
Smart Control
Your dehumidifier is fitted with both a traditional humidistat (see section For use via the Humidistat) and a patented
intelligent Smart Control System. We recommend that all customers use the intelligent system, which automatically
adjusts the running pattern of your Ebac according to changes in the weather and your lifestyle.
Smart control options.
1. Auto Economy (indicated by one green light illuminated) 2. Auto (indicated by two green lights illuminated)
3. Continuous (indicated by all three lights illuminated)
4. Off (no lights illuminated)
To activate Smart
To activate Smart Control, press the mode button until AUTO is displayed on the control panel. The unit should start in
this mode when connected to the mains. The unit will now automatically adjust itself to work at the times needed to
maintain the ideal conditions for your home. After starting to use the unit for the first time it normally takes 2–4
weeks to get the humidity in your home under control.
Once signs of excess moisture have gone we would recommend that you try switching to Economy mode by pressing
the mode button until AUTO and ECON are displayed on the control panel. The unit will still work using the Smart
Control but for less time each day.
N N O O T T E E : : Economy mode may not be suitable for all homes and/or at certain times of the year. If signs of excess
humidity return switch off economy by pressing the mode button until the control panel shows AUTO without ECON
being lit.
GB
1 4
2 8
7
3
5
9 6
59