Konyks Vollo Max Easy Mode D'emploi page 7

5. The top button light should blink
quickly, if not do a RESET by pressing
the bottom button for approx. 20 sec
6. From the Konyks APP click on
at the top right of the screen
7. The APP must automatically detect the device
to be installed and offer it. Validate by clicking
on "Go to Add" then on +
8. The APP prompts you to enter your Wi-Fi
password (be careful with upper and lower case
letters) then click on "Confirm"
9. The installation will continue with "Connecting
Now" displayed. Wait 10 to 15 seconds.
10. Your Switch is installed and functional. If not go
back to step 5
For more instructions on using your product,
scan the QR Code on page 3
7
+