After Each Use; Battery Removal - Remington PG6160 Mode D'emploi

ENGLISH
C CARE FOR YOUR GROOMER
• Care for your product to ensure a long lasting performance. We recommend
that you clean your groomer after each use.
• The easiest and most hygienic way to clean the groomer is by rinsing the
product after use with warm water.

, AFTER EACH USE

• Brush any accumulated hairs from the groomer and attachment heads.
• The easiest and most hygienic way to clean the groomer is by rinsing with
warm water.
• The groomer body should not be rinsed.
• Place one or two drops of cutter oil or sewing machine oil on the
blades.
• Turn the groomer on to distribute the oil evenly, wipe off any excess
oil.
• Dry the groomer immediately after use.

BATTERY REMOVAL

• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when removing
the battery.
• Ensure the trimmer is discharged of all power.
• Remove the attachment head from the appliance.
• Using a small screwdriver, pry off the front housing carefully.
• Open the front housing and take out the inner housing
• Take out the PCB and motor assembly from the housing
• Cut the tabs on both ends of the battery and remove it from the printed
circuit board.
• The battery is to be disposed of safely.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, appliances marked with
this symbol must not be disposed of with unsorted municipal waste,
but recovered, reused or recycled.
8