FenSens FENEU1 Mode D'emploi page 29

15.
I'm Not Receiving Audio Alerts Or TAP Button Notifications
For any button related issues, please see above FAQ's and make sure to
check all permissions in APP. You should also turn on Location Services
on your phone as our beacon uses this to determine if you are close to
the device and send a push notification.
Here are the best ways to troubleshoot your audio alerts not working:
1.
Turn on the sound from the mute switch to the left side of the iPhone.
2.
Turn on the sound on from within the parking page in APP.
3.
Adjust the volume to a maximum in the parking page.
4.
Make sure there is a target within 2.5 to 3 meters from your car.
The app will only beep if an object is detected in that range, but not
further.
16.
Can I Take The Button Out Of The Holder?
Yes, the button is fully removable from the holder. Simply pinch the
holder back to loosen the button, then use both fingers to carefully
pluck the button from the button holder. Use the included 3M tape that
came with your screw kit to place the button anywhere you want in the
vehicle.
17.
How Do I Use The TAP Button?
The TAP button launches the app automatically on Android and will
send you a push notification on iOS. For best operability, please make
sure you accept all permissions the app asks for and for iOS have the
app running in the background. One tap on Android will launch the
parking sensor page, another tap will take you out of the parking page
to the home screen. A long hold of 4 seconds on Android or iOS will put
the button into pairing mode if you are having trouble pairing with the
button.
27