Security-Center PROFILINE TV8720 Instructions D'installation page 13

5. Distance setting for TV8720
Make sure you set the distance between the sender module and receiver module on the receiver module. This ensures optimal picture quality.
The minimum distance should be greater than 100 meters, since the integrated signal amplification may cause overmodulation of the video
signal.
6. Technical data for TV8720
Video IN /
Video out
Transmission distance
Recommended cable
Operating voltage 12VDC each (230VAC/12VDC – 300mA power unit in scope of delivery)
Power consumption
Dimensions (HxWxD)
Temperature range
DIP switches
0-300m -> 1 to ON, all others to OFF
300-600m-> 2 to ON, all others to OFF
600-900m-> 3 to ON, all others to OFF
900-1200m-> 4 to ON, all others to OFF
1200-1500m-> 5 to ON, all others to OFF
1Vss / 75 Ohm
100 – 1500 meters
Twisted pair (24AWG)
40mA each
24 x 110 x 77mm
0°C – 50°C
13