Video Output; Dip Switch - Fujitsu CG-311 Série Mode D'emploi

VIDEO OUTPUT

BNC OUTPUT
The output of this connector is a composite
Video Signal. Use a high quality 75 Ω coaxial
cable between the camera and other video
equipment. At the "Video Equipment"end of
the coaxial cable, terminate the signal with a 75
Ω resistor.
En-12

DIP SWITCH

#1: AGC OFF/ON
#2: ESC OFF/ON
#3: BLC OFF/ON
#4: ECLIPSEROFF/ON
#1: AGC
#2: ESC
#3: BLC
#4: ECLP
NOTE: 7 is factory setup.
#5: AWB HOLD/AUTO
#6: SYNC AUTO/INT
#7: D/N AUTO/HOLD
#8: FLICKERLESS ON/OFF
#5: AWB
#6: SYNC
#7: D/N
#8: FL
Fig. 7