Using The Power Adapter; Important Safety Measures; English - i-tec 1x USB-C PD Mode D'emploi

i-tec USB-C CHARGER 60W + USB-A Port 12W
SPECIFICATIONS
• Input voltage AC 110-240V, 50-60 Hz, max. 1.5 A
• Output power (max): 60.0 W
• USB-C PD output voltage: DC 5.0V / 9.0V / 12.0V / 15.0V / 18.0V / 20.0V
• USB-C PD output current: max. 3.0 A
• USB-A QC 3.0 output voltage: DC 5.0V / 9.0V / 12.0V / 20.0V
• USB-A QC 3.0 output current: max. 3.0 A
• Protection against: current overload, overvoltage, short circuit and
overheating.
• Operating values: 0 °C – 40 °C
• Relative humidity: 20% – 80%
• Product dimensions: 70 x 73 x 31 mm
• Product weight: 175 g

USING THE POWER ADAPTER

Connecting the universal adapter to the device:
1. Connect the adapter to the 110/230V mains, using the supplied cable.
2. Connect the USB-C cable to the USB-C port on the power adapter.
3. Connect the USB-C cable to the charging USB-C port on the device.
4. The LED indicator will illuminate and charging will begin.
Note: When powering mobile phones and similar devices without a USB-C
connector, you can use the USB-A port on the adapter. Power over the USB-A
port is provided on the assumption that the given device supports it.

IMPORTANT SAFETY MEASURES:

• Do not pull the power supply cable from the mains socket by pulling
the cable.
• Do not connect to or pull the power cord from the socket with wet hands.
• Do not connect the adapter if it is damaged (e.g. short circuit, burnt PVC
case).
• Immediately disconnect the adapter from the mains socket should you
smell burning.
• Do not disassemble this device or make modifications, as this could case
a fire risk, injury or damage to personal property. Entrust all repairs to the
manufacturer, i-tec Technologies s.r.o..
• Do not expose the adapter to direct sunlight, place it on heating elements,
or on any other heat. Do not cover it with paper or any other material that
could influence air circulation.
• Do not use the adapter in an environment with a temperature below 0°C or
higher than 40°C. Use in ventilated areas only.
• Do not place the adapter on heat-sensitive surfaces.
• Make sure your power supply provides the required voltage (V) and
frequency (Hz).
• Do not use the adapter with damaged supply cord, cable or fuses.
• Keep away from children.
6 |

ENGLISH