Troubleshooting - GreenWorks Commercial GH 260 Guide D'utilisation

TROUBLESHOOTING

PROBLEM
Motor fails to start
when switch trigger
is depressed.
Motor runs,but cutting
blades do not move.
Hedge trimmer smokes
during operation.
Motor hums, blades
do not move.
POSSIBLE CAUSE
Battery is not secure.
Battery is not charged.
Hedger damaged.
Do not use hedge trimmer.
Hedger damaged.
Do not use hedge trimmer.
D e r b s i r o o h t r e m a y
jamming the blades
SOLUTION
To secure the battery pack, make sure
the latches on the top of the battery pack
snap into place.
Charge the battery pack according to the
instructions included with your model.
Call for technical service.
Call for technical service.
b e Remove battery, clear debris blockage
from blades.
17