Wireless Headset Setup Through Bluetooth - HyperX Cloud MIX Mode D'emploi

Wireless headset setup through Bluetooth®
Bluetooth pairing
1. With the headset turned off, press and hold the power button
indicator will flash red and blue.
2. On your Bluetooth-enabled device, search and connect to HyperX Cloud MIX. Once connected,
the indicator LED will flash blue every 5 seconds.
Turning on/off
Power on/off – Hold down the power button
Document No. 480HX-HSCAM.A01
Bluetooth pairing
Turning on/off
for 2 seconds
TM
HyperX Cloud MIX
for 5 seconds. The LED
Page 7 of 9