Siemens Gigaset Repeater Mode D'emploi page 16

Preparing
Preparing the Gigaset 2015/2016plus
INT
O441B
4 4 1
REDIAL
Preparing the Gigaset 3010/3015
B4 ¤ „
INT
SET
Some base stations have to be prepared for operation of
the repeater.
If you are using a Gigaset base station which is not
mentioned here, you can proceed to the registration
procedure on page 17.
Carry out the following procedure on your handset:
B#1
Press the following keys.
or
# 1
SET
o
Enter the 4-digit system code.
Press the following keys.
or
SET
This completes the preparatory steps. You may now
continue on with the registration procedure on page 17.
Carry out the following procedure on your handset:
Press the following keys
or
4 ¤
OK
„
o
Enter the 4-digit system code.
1 „
Press the following keys.
This completes the preparatory steps. You may now
continue on with the registration procedure on page 17.
Preparing
15