Sleep Mode; Battery Status Message; Software Update - Q-Connect KF 14926 Manuel D'utilisation

Exit
Direction

Sleep Mode

The detector will enter sleep mode after 5 minutes of idling in order to save power.
The information on the display window will turn off and only the blue ON/OFF indicator
lights up. The machine can be waken up and return to working mode by touching any key or
feeding.
When the machine is in sleep mode with only built-in battery, if the machine is idle for more
15 minutes again, the machine will power off automatically.

Battery Status Message

When the machine is charging the battery, the Sheets Display Window will display "–Ch" at
an interval to indicate the charging status. Usually it needs about 15 hours or more to make
the power of battery fully. If the voltage is low, the Sheets Display Window will display "-Lo"
at an interval to remind the user of that the battery needs to be charged or the user should
turn off the banknote detector.

Software Update

5. Turn off the banknote detector first, and then use the provided download cable to
connect the USB port on PC and the USB port of the detector together.
6. Put the DC output plug into the DC socket.(make sure that the adapter is inserted
7. Next, first press "CLR" key and hold on it, and then press "ON/OFF" key. If seven
pieces of "-" are displayed on the Sheets Display Window and Value Display
Window, it shows the machine has entered into download mode.
8. If the display window doesn't display seven pieces of "-", please retry 1 and 2steps
again.
9. Run "Auto Download software" on PC and click "LoadFile" button to load the update
software(***.UPL)(see Figure 4), then click "Update Soft" button to download the
software.(See Figure 5)
15
Total Number
Currency Type
Figure 3
Total Value