Philips arcitec RQ1062/17 Mode D'emploi page 14

English
16
- You can clean the outside of the shaver with a
damp cloth.
- Regular cleaning guarantees better shaving
performance.
Cleaning the shaving unit under the tap
1 Switch off the shaver.
2 Pull open the three shaving heads one by one.
 Rinse all three shaving heads and all three hair
chambers under a hot tap for 0 seconds.
Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.
4 Carefully shake off excess water and leave the
shaving heads open to let the shaving unit dry
completely.
Never dry the shaving unit with a towel or tissue,
as this may damage the shaving heads.
For thorough cleaning, switch on the shaver and
,
immerse the shaving unit in hot water with some
liquid soap for 0 seconds. You can also clean the
shaving unit with some alcohol.