Sonoff DIY iFan03 Mode D'emploi page 9

SONOFF TECHNOLOGIES CO., LTD.
3. Download the eWeLink APP
4.
Power on
After powering on, the device will enter the quick pairing mode (Touch) during the
first use, then the fan makes two short beeps and one long beep.
If not paired within 3mins, the device will exit the quick pairing mode (Touch). If
you need enter again, long press the "pairing button" on the controller or
"Wi-Fi pairing button" on the RM433 remote controller and hold 5s until the fan
makes two short and one long "bi" sound and release.
5. Add the device
Tap "+" and select "Quick Pairing", then operate following the prompt on the APP.
eWeLink
8
eWeLink
Android™ & iOS
Add Device
Quick Pairing
WIFI devices can be added in this mo
de(make sure the device is in pairing
mode).
Scan QR code
GSM devices and devices with QR co
de can be added in this mode.
Sound Pairing
Add device in this mode if your
devic e support this feature.
English