Troubleshooting - Magic Chef MCIM22RT Manuel D'utilisation

TROUBLESHOOTING

Problem
"ADD WATER"
Lack of water.
indicator is on.
"ICE" indicator
Ice basket is full.
is on.
"WATER" and "ICE"
indicators are both Ice shovel is stuck.
illuminated.
Ice making cycle is too long.
Water temperature in inner tank is too low.
Ice cubes stick
together.
Leaving ice in the appliance for an extended
period of time may result in the appliance
recycling the ice by melting it down and making
a new batch.
Leaving ice in the appliance for an extended
Ice cubes are period of time may result in the appliance
melting. recycling the ice by melting it down and making
a new batch.
Ambient temperature or water temperature in
Ice making cycle is
inner tank is too high.
normal but no ice
Refrigerant liquid leakage.
is made.
Pipe in the cooling system is blocked.
Possible Cause
10
Solution
Stop the ice maker, gill water, and press "POWER"
button again to restart the unit.
Remove ice from ice basket or continuously press
"SELECT" button 5 seconds. The unit could make
ice 10 cycles even "ICE" indicator is on.
Check if ice is blocking the ice shovel, otherwise
consult a certified technician.
Stop the ice maker, and restart when the ice
blocks melt. Select the small ice size.
Change the water in the reservoir. Use water
between 45°F-90°F.
Transfer ready-made ice to another container and
store in a cooler or freezer to avoid recycling.
After extended period transfer ready-made ice to
another container and store in a cooler of freezer
to avoid recycling.
Operate the ice maker below ambient temperature
of 90°F and use cold water.
Consult a qualified technician.
Consult a qualified technician.