Genie LT-400 Guide D'utilisation page 14

Insertion of paper
1. Pull off the fixing unit backwards.
2. Place paper or similar soft material on the plastic base. The limit stop lines will
help you to find your favoured position and to get a precise cut.
3. Then click down the fixing unit to lock the paper.
Cutting
For cutting please push the cutting unit along the guard rail. Inserted paper will be cut
at the zero line. For removing the cut material you maybe have to pull off the fixing
unit again.
HANDLING THE GUARANTEE
Thank you very much for purchasing this GENIE product. Please note the following
advice whenever this machine does not function faultlessly, contrary to expectations.
The guarantee period amounts to 24 months from the date of purchase, provided that
the machine has been used appropriately. Please keep the proof-of-purchase
voucher and original packaging in a safe place. The warranty is only valid for defects
in materials or fabrication. However, it is invalid for damage that has occurred to
breakable parts, e.g., on the casing. Machines that have been damaged by
inappropriate use externally, are excluded from being exchanged. A guarantee will
expire whenever any repairs have been carried out without the express consent of
our customer service department.
Repairs under the guarantee can only be made when the proof-of-purchase voucher
is enclosed with the defective machine – please notify us about the return by
telephone! Please give your name, address, post code, town and telephone number
with the dialing code. Please state the reason for your complaint too.
We regret any inconvenience caused!
Our service hot line
Tel. +49 (0) 6122-7279891 ● Fax +49 (0) 6122-705952 ●
E-mail: service@genie-online.de
Address: GENIE GmbH & Co. KG, -Service- , Berta-Cramer-Ring 22, D-65205
Wiesbaden, Germany
14