Connecting To Your Tv; Method 1. Connecting With A Cable; Connecting Using An Optical Cable - Samsung HW-N450 Manuel D'utilisation

Masquer les pouces Voir aussi pour HW-N450:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

04 CONNECTING TO YOUR TV

Hear TV sound from your Soundbar through wired or wireless connections.
• When the Soundbar is connected to selected Samsung TVs, the Soundbar can be controlled using
the TV's remote control.
– This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when
you connect the Soundbar to the TV using an optical cable.
– This function also allows you to use the TV menu to adjust the sound field and various settings
as well as the volume and mute.

Method 1. Connecting with a Cable

When the audio in a broadcast is encoded in Dolby Digital and the "Digital Output Audio Format" on
your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the setting on
the TV is changed, you will experience better sound quality. (The TV menu may differ depending on the
TV manufacturer.)

Connecting using an Optical Cable

1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV
with a digital optical cable.
2. Press the
(Source) button on the right side panel or remote control, and then select the "D.IN"
mode.

Optical Cable
OPTICAL OUT
ENG - 9
Bottom of the Soundbar
DIGITAL AUDIO IN
(OPTICAL)
USB (5V 0.5A)
AUX IN
Right Side of the Soundbar
D.IN


Publicité

Table des Matières
loading

Table des Matières