Safety Information; Symbol Explanations - Ayce 804005 Traduction De La Notice Originale

Masquer les pouces Voir aussi pour 804005:
Table des Matières

Publicité

SAFETY INFORMATION

1. Before starting work, switch o /disconnect the mains (220-240V) Always turn o the
power at the fuse box.
2. Do not stare directly at the LED light beam.
3. Do not position or place the product near to heaters, flame or any other direct sources
of heat.
4. This product is suitable for positioning on surfaces which have normal flammability e.g.
wood, plasterboard or masonry. However this does not include highly flammable
surfaces (e.g.polystyrene or textiles).
5. Please keep these instructions for future reference! Always refer to the technical data on
the product.
6. Indoor use only.
7. The light source of this luminaire can not be replaced; when the light source reaches the
end of its life, the entire luminaire must be replaced.
8. The external flexible cable or cord of this luminaire cannot be replaced; if the cord is
damaged, the luminaire shall be destroyed.

SYMBOL EXPLANATIONS

The crossed-out wheeled bin symbol indicates that the item should be disposed
of separately from household waste. The item should be handed in for recycling
in accordance with local environmental regulations for waste disposal.
By separating a marked item from household waste, you will help reduce the
volume of waste sent to incinerators or land-fill and minimize any potential
negative impact on human health and the environment.
Complies with European regulations applicable to this product.
A Class II product
This product is designed for indoor use only. Never use it outdoors.
12
GB

Publicité

Table des Matières
loading

Table des Matières