Minimum/Maximum Slab Weights; Ice Thickness Check - Koolaire K Série Mode D'emploi

Section 3

MINIMUM/MAXIMUM SLAB WEIGHTS

Adjust ice thickness to meet chart
specifications.
Minimum Ice
Model Weight Per
Cycle
3.4 lbs
K0300
1542 g
3.4 lbs
K0400
1542 g
3.4 lbs
K0420
1542 g
4.125 lbs
K0500
1871 g
4.125 lbs
K0700
1871 g
7.25 lbs
K1000
3288 g
13.2 lbs
K1700
5987 g
Part Number: 000014142 Rev 02 5/17
Maximum Ice
Weight Per
Cycle
3.9 lbs
1769 g
3.9 lbs
1769 g
3.9 lbs
1769 g
4.75 lbs
2154 g
4.75 lbs
2154 g
7.75 lbs
3515 g
14.8 lbs
6713 g

ICE THICKNESS CHECK

After a harvest cycle, inspect the ice cubes
in the ice storage bin. The ice thickness
float switch is factory-set to maintain the
ice bridge thickness at 1/8" (3 mm).
NOTE: Make sure the water curtain is
in place when performing this check. It
prevents water from splashing out of the
water trough.
1. Inspect the bridge connecting the
cubes. It should be about 1/8" (3 mm)
thick.
2. If adjustment is necessary make the
following adjustment as you face the
machine.
NOTE: The float can be adjusted with a 3/4"
wrench while the water trough is in place.
• Turn the ice thickness float switch to the
right to increase bridge thickness
• Turn the ice thickness float switch to the
left to decrease bridge thickness.
• Test run two cycles to verify bridge
thickness.
Ice Thickness Float
Switch Adjustment
Operation
27