TnB CSTRAVELBK Mode D'emploi page 6

EN
Disconnect the Headset
To disconnect the headset from your device, switch off the headset, or disconnect it
in Bluetooth menu of your device.
Reconnect the headset
To connect the headset to the phone or Bluetooth devices that you have last used
with it, switch on the headset, or make the connection in the Bluetooth menu of
your device.
Passive Mode
You can use CSTRAVEL headphones as a wired headphone to save batteries.
Simply connect one end of the auxiliary cable to the bottom of the left ear cup to
your MP3 player. Inserting an audio cable disable the wireless functionality.
Low Battery Warning
At power on condition, when battery voltage is lower than 3.0V, there will be a
warning beep every 60 seconds.
Power-Off at Low Battery Condition
At power on condition, when battery voltage is lower than 2.9V, the headset will
switch off automatically.
Note : When using the headphones on airplane, please use the 2-pins aircraft adapter
(included).
CSTRAVALBK_notice_EXE.indd 6 16/06/2017 12:02