Henry Schein HS-TIERWAAGE Mode D'emploi page 16

5. WARNINGS
> In the event of a malfunction, please contact your dealer or the manufacturer.
Unauthorised modifications or repairs can damage your scale and will cause the
manufacturer's warranty to become void.
> Display units should be protected from moisture. Liquids (e.g. water) can damage the
display unit. Use a dry cloth, e.g. a towel, to wipe the display.
> Disconnect the power supply before installation, cleaning or maintenance of the
device. Otherwise, the device could be damaged.
> Do not expose the display to direct sunlight. This could cause colour changes.
> If you are not using the display for long periods, disconnect the power supply, or
switch off the display if it is operating on battery power. Recharge the batteries after 4
weeks at the latest, to compensate for self-discharge.
> Avoid stacking any materials on top of the display, or placing any weights on it. This
can damage the display.
> Place the scale on a solid, stable and level surface: this will ensure that
measurements are accurate. Accuracy is affected if the scale are tilted or placed on a
carpeted floor.
> Do not connect the scale to an unstable power source.
> Use only the original equipment. Use of other brands can cause damage to the
display.
www.henryscheinbrand.com
16