JSP FAR0902 Instructions Pour L'installation, L'utilisation, L'entretien page 3

MARKING
Marking on the connectors, which must be in place, intact and legible while the connector
is in use.
1 2 3 4 5 6 7
1. Manufacturer
2. Conformity mark to the Regulation (EU) 2016/425
3. Controlling Notified body
4. Minimum breaking load
5. Standard number/year
6. Class of the standard to which the product complies
7. Read the User Instructions
DESCRIPTION
This connector is classed as a Personal Protective Equipment (PPE) by the European PPE
Regulation (EU) 2016/425 and has been shown to comply with this regulation through the
Harmonized European Standard EN 362:2004 Class:
Q: Connector which is closed by a screw-motion gate, which is a load bearing part of the connector when fully screwed
up, intended to be used only for long-term or permanent connections.
B: Basic connector, self-closing connector intended to be used as a component.
M: Basic or screw link connector intended to be used as a component, which may be loaded in the major and minor axis.
T: Termination connector self-closing connector designed to allow the fixing as an element of a sub-system in such a way
that the loading is in a predetermined direction.
A: Anchor connector, connector which closes automatically, designed to be linked directly to a specific type of anchor as
a component.
Certification body:
SATRA Technology Europe Ltd, Bracetown Business Park, Clonee, Dublin D15 YN2P Ireland
(Notified Body 2777)
Ongoing Assessment Body:
SGS United Kingdom Ltd., Unit 202B, Worle Parkway, Weston-super-Mare, BS22
6WA, UNITED KINGDOM. (Notified Body 0120)
3