Klarstein Aquatica 10034126 Guide De Démarrage Rapide page 41

Note: If your model has broken remember function, the machine will go on to fi nish
the selected program after the power cut.
Adding dishes later
A forgotten dish can be added any time before the detergent dispenser opens. In this
case, follow the instructions below:
1 Press the Start/Pause button.
2 Open the door a little to stop the washing.
3 After the spray arms stop working, you can open the door completely.
4 Add forgotten dishes.
5 Close the door.
6 Press the Start/Pause button to start the dishwasher again.
After the end of the program
At the end of the program, the buzzer will sound for 8 seconds. Press the power button
to turn off the power. Turn off the tap and open the dishwasher door. Wait a few minutes
before unloading the dishwasher to avoid scalding. The dishes are still very hot after drying
and can easily break. They will also dry better.
1. Switch off the dishwasher:
• Press the Power button.
• Turn off the water tap!
2. Open the door carefully:
• Hot dishes are sensitive to knocks. The dishes should be allowed to cool down
around 15 minutes before removing from the appliance.
• Open the dishwasher's door, leave it ajar and wait a few minutes before removing
the dishes. In this way they will be cooler and the drying will be improved.
3. Unloading the dishwasher
• It is normal that the dishwasher is wet inside.
CAUTION
Risk of scalding! Never open the door during the washing process, as
the hot water may scald you.
EN
41