Beeverycreative BEETHEFIRST Guide D'utilisation Rapide page 18

HOW TO PRINT
1. Make sure the blue tape is in an acceptable condition. If it's damaged, it should be
replaced as described in point 4 of 'Installing BEETHEFIRST'.
2. Make sure that no objects or filament debris are on the printer table.
3. Import the 3D model you wish to print. You can find a range of 3D models online, or
you can create your own 3D model by using modelling software (not included).
4. Make sure you've followed the steps laid out in BEESOFT's printer calibration wizard.
5. Click on the "Import Model" button in BEESOFT and select the file you imported.
6. Click on the "Print" button and select the desired printing options.
7. BEESOFT will prepare the selected file for printing (a process called "slicing"), which
may take a few minutes. Once it's ready, the printing process will begin.
18