Linksys AC1900 Mode D'emploi page 21

a) Enter the PIN from the client device in the field on the extender's WPS
screen.
b) Click Register on the extender's WPS screen. When the connection is
complete, the indicator LED on the front of the range extender will be solid
green for 10 seconds.
c) Click OK on the extender's WPS screen within two minutes or you will have to
start over.
3. Connecting with the extender's PIN
a)
On the client device, enter the PIN listed on the extender's WPS screen. (It is
also listed on the product label on the back of the extender.)
b)
Click OK on the client device's WPS screen within two minutes.
21