Initial Operation - Storch Power LED Akku 15 W Mode D'emploi

Store the battery back at room temperature (18° C to 24° C) when it is not used. In case
of extended periods of storage, charge the battery once a year to avoid deep discharge.
After charging the battery pack allow it to cool down. Do not leave it in warm areas or in
direct sunlight.
Charge the battery with the charger supplied only.
Cold weather operation
This lithium battery pack functions optimally at temperatures between 0° C and 40° C.
The output of the battery pack may be significantly impaired if the battery pack is very
cold.
Charging the battery pack
Note: this Lithium battery pack is supplied with partial charge. Charge the battery pack
fully prior to first use. A fully discharged battery pack can be fully charged to an optimum
extent at an ambient temperature of between 0° C and 40° C.
Charge the lithium-ion battery pack using the matching, supplied charger. Connect the
charger to the matching socket on the bottom side of the lamp and only then connect the
mains plug to a suitable socket outlet. The charging indicator lights up. As soon as all the
bars of the charging indicator light up, the battery is fully charged.
Replacing the LED bulb
It is not possible to replace the LED bulb. If a fault occurs, please contact your
STORCH sales team member or the STORCH service hotline.

Initial operation

The luminaire is switched on by pressing the red button on the back. Pressing the red
button multiple times enables switching to the brighter lighting levels. The luminaire
has a total of 3 lighting levels: 25 %, 50 % and 100 %. After the highest lighting level
has been reached, pressing the button again switches the luminaire off.
Charging function of the USB interface.
The power LED battery 50 W light is equipped with an additional USB interface that can
be used for charging your devices, e.g. your smartphone.
29 Translation of the original instruction