Publicité
Power
Absorption
Lamp power /
Led light output
Protection level
(With aerial assembled)
(*) LAMP3 and LAMP4 are exclusively designed for use with control cards featuring a built-in flashing light
circuit as they are not fitted with an electrical circuit.
Connections (fig. 2)
2. AERIAL
(fig. 1)
Frequecy band
LAMP3A and LAMP4A flashing lights have a 433,92 Mhz built-in aerial.
3. ASSEMBLlNG THE FLASHING LlGHT/AERIAL UNIT
4. FIXING THE FLASHING LlGHT
Choose a place:
• near the gate or automated door;
• free from visual obstacles (also to facilitate radio reception).
1_ On a flat base (fig. 6 - fig. 7)
The bottom stand is not needed.
Use expansion bolts (masonry pillar) or self-threading screws (metal pillar).
2_ By the side or at the front (fig. 8)
Install the flashing light on the bottom stand you fixed previously.
Note: use a soft, damp cloth to clean the lamp. Do not use chemical cleaning agents.
5. FIXING JUST THE AERIAL
Use expansion bolts (masonry pillar) or self-threading screws (metal pillar).
DEUTSCH
1. BLlNKLAMPE
Technlsche Merkmale
Einspeisung
Entnahme
Versorgung der Lampe
Schutzart
(mit montierter Antenne)
Einspeisung
Entnahme
Versorgungder Lampe /
Lichtstrom Led
Schutzart
(mit montierter Antenne)
(*) LAMP3 und LAMP4 sind ausschließlich für den Anschluss an Steuerkarten mit eingebautem Blinkkreislauf
entstanten und verf9gen über keinen eigenen elektrischen Kreislauf.
Anschlüsse (Abb. 2)
LAMP4*
LAMP4A*
12V
2A
25W
(fig.9)
(Abb. 3)
LAMP1
12V
2,1A
25W
LAMP4*
12V
2A
25W
LAMPCON4
12V
12-24V
2A
0,8-0,4A
25W
15-10W
IP44
ANTQ/ANTQ1
26,995MHz ÷ 40,665MHz
LAMP2
LAMP3*
230V
230V
0,1A
0,1A
25W
25W
IP44
LAMP4A*
LAMPCON4
12V
12-24V
2A
0,8-0,4A
25W
15-10W
IP44
LAMP SERIES
LAMP5
24V
12-24V DC
1A
140 mA
3,3 W (24V DC) /
25W
165 lumen - 24V DC
ANTD/ANTD1
433,92MHz
(fig. 5)
LAMP3A*
LAMPCON3
230V
230V
0,1A
25W
LAMP5
T-LED
24V
12-24V DC
1A
140 mA
3,3 W (24V DC) /
25W
165 lumen - 24V DC
T-LED
0,1A
25W
5
Publicité
