Overview Of The Components - HAEGER Perfect Drip Mode D'emploi

English

Overview of the components

1. Brew basket with grinder and filter
3. Glass carafe
5. Water tank
7. Grinder blade
9. Permanent filter
Before First Use
This appliance is designed to brew drip coffee by the effect of hot water
•
passing through ground coffee.
Completely remove all the transport and packaging items inside or outside
•
the appliance. Check that neither the appliance nor any of its parts is
damaged.
Thoroughly wash the permanent filter and its holder and the jar in warm
•
water with a small amount of neutral kitchen detergent. Rinse under clean
running water and dry well.
Wipe the coffee maker with a soft sponge lightly dipped in warm water.
•
Then wipe with a dry wiping cloth.
Put the appliance on a flat and stable surface.
•
Put the plug in an earthed wall socket.
•
Open the top cover and fill the water tank with fresh, cold water to the
•
maximum indication and put the jug in place.
Setting the time
Program the time by pressing "Prog" button one time, the LCD displays
•
"CLOCK" at the top right corner.
Set the current time by pressing "HR" and "MIN" button.
•
Press the "Prog" button, the LCD displays "TIMER" on the top left corner,
•
then press again the "Prog" button to finish.
Note: The clock of coffee maker uses a 24-hours system. The coffee maker
can also be operated without the time being set, however, if, wish to use
the automatic start function, it is important to set the time.
4
2. Control panel
4. Top cover
6. Main body
8. Coffee container
Instructions for use