Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
General Safety Instructions
Attention!
This information needs to be considered during handling and
operation of the ISOPAD Electronic Temperature Controllers
references Series ICon-TD7000:
Please read the manual carefully ahead of use of this apparatus.
Follow the declaration on the type plate and the warning instructions
at the device.
Keep this manual for later appropriation!
This manual needs to be held in charge apparently. The device can be operated
only according to occupational health and safety law, regional safety regulations
and instructions of the Accident Prevention & Insurance Association.
Please take these advices as part of the operating instructions of your
QA-System Handbook. Handle these advices also like a manual.
Never remove the warning labels on the product!
This product had been designed and manufactured according to standard
EN 14597 and EN 61010-1.
Operation, installation, supply and maintenance of the product need to be
realized in accordance with these standards!
Electrical Equipment
These products represent electrical equipment!
To guard against electric shock, the device has to be maintained and services
by authorized staff and users only!
To prevent from danger caused by electric energy, an earth leakage current
breaker (ELCB or RCD) has to be installed for protection purpose.
This ELCB or RCD should represent a tripping current of 30mA.
Products which show visible damages have to be set off operation and safely
stored to prevent from reuse. Reuse may lead to personal injury and needs
to be avoided!
Inflammation and Explosion Risk!
The product is not explosion-proof.
It should never be integrated into tempering processes where
liquids handled may support explosions.
This covers also applications where gas/air-mixtures may occur.
The product must not be used to heat explosive media or those
developing explosive gases when heated.
The product must be installed only outside hazardous locations.
5
Publicité
Table des Matières
