Publicité
Les langues disponibles
Les langues disponibles
D 0801 / F86-801P
Press the transmitter onto the desired positions for about 30 seconds
You can also mount the transmitter with
screws if you prefer.
C. TROUBLE SHOOTING
This appliance is already paired. It is ready to use.
If no function when press the transmitter:
-
Check that the receiver is correctly mounted on bulb holder
-
Check that the bulb holder is supplied with power
-
Check that your bulb light is properly working
If the appliance is still not working you can pair the transmitter and receiver together
yourself :
-
Install the receptor on the bulb holder
-
Install a bulb on the receptor
-
Insert a pin (non metallic) in the hole on the side
-
Make a long press until the red led lights up.
-
Press on the transmitter until the buld lights up
-
Transmitter and receptor are correctly paired.
D. CARE AND MAINTENANCE
Clean the product only with a dry, lint-free cloth.
Do not use abrasive cleaners to clean the unit.
E. FEATURES
Material : ABS, Polypropylene
Power supply :110v-220V
Range : 50m in an open area.
RF frequency :433.92MHz
Transmitter/switch : IP 44 ( splash protection)
The European directive 2012/19/EC about electronic and electric waste, requires that
you can't throw away defective domestic appliance with common waste. Used device has to
be collect separately to optimize the recuperation rate and the recycling of the materials to
reduce the impact on the health and the environment.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capacities, or by persons lacking in experience or knowledge, unless they
are supervised or instructed on the use of this apparatus by a person responsible for their
safety.Children should be supervised to ensure they do not play with this appliance.
Importé par / Importiert von / Geïmporteerd door / Imported by :
CAPTELEC, 59170 Croix - FRANCE
Publicité
