Step 1: Connect Your Hdtv To Your Hp Mediasmart Connect; Selecting A Good Location; Connecting To The Hdtv - HP MediaSmart Connect x280n Guide D'installation Et Manuel De L'utilisateur

Step 1: Connect Your HDTV to
Your HP MediaSmart Connect

Selecting a good location

When selecting the location for your HP MediaSmart Connect,
consider the following conditions:
Orientation: Position the HP MediaSmart Connect so that it is
flat (horizontal).
IMPORTANT: If you place the device in an enclosed
!
shelf, provide adequate air flow to keep it cool. See
"Environment" in "Chapter 9: Specifications" on
page 97.
Power adaptor length: Choose a location with easy access to
an AC power outlet.
Cable lengths and distances to attached units: Check that
cables can reach the TV, and other units, as needed.
Getting Started
The type of network (wired or wireless), and the wireless
router location: For more information, see "Chapter 2:
Connecting your HP MediaSmart Connect to your Home
Network" on page 35.

Connecting to the HDTV

Your HDTV video connectors and your external sound system
usage determine how you connect them to the HP MediaSmart
Connect.
WARNING: The HP MediaSmart Connect does not
w
support standard-definition televisions or monitors.
For the best video connection to the television, use the HDMI
connector and the HDMI cable from the box.
If you have a surround sound receiver connected to the HDTV,
connect the HP MediaSmart Connect to the receiver, using the
setup instructions that follow. Choose the setup instructions that
match your receiver video connector and external sound system
usage.
16