Technical Specifications - MAX TOOLS JSL280 Mode D'emploi

English
Charging of cell phones and tablets
1. Plug the switch cable to Quick Charge output port.
2. Select appropriate connector and connect it to your mobile phones or tablet.
3. Touch the switch button, it can recognise electronic products's suitable
parameters, start to charge for mobile phone/tablets etc.
For power supply to 12V vehicle products or 12V electronics
1. Connect the charging cable (not included) to the 15V 10A output port (8).
2. Connect the other end of the cable to the 12V device.
3. Press the button (5) to start charging.
Use of the LED lamp
Press the switch 3 seconds to start the LED flash light.
There are 4 modes of LED light appear in order (normal, strobe. SOS, off) if you
press slightly.

TECHNICAL SPECIFICATIONS

Lithium Battery Capacity (LiPo)*
Outputs
Input socket
Recharge time
Cranking Ampere
Peak Ampere
Operating temperatures
Sizes
Weight
(*) Lithium polymer Battery
18
JSL280
13.000 mAh (48.1 Wh)
5V-2.1A; Quick Charge
(5V-2.4A; 9V-2A;
12V-1.5A),12V jump start
Quick Charge 5V / 9V
Max 3 hours
500A
1500A
-20°C / 60°C
151x81x32 mm
440 gr
JSL350
17.000 mAh (62.9 Wh)
5V-2.1A; Quick Charge
(5V-2.4A; 9V-2A; 12V-1.5A),
15V 10A; 12V jump start
Quick Charge 5V / 9V
Max 4 hours
700A
2100A
-20°C / 60°C
231.5x90.5x29.5 mm
605 gr