Tektronix DMM912 Manuel D'instructions page 23

Input connector for current measurements up to
A mA.
400 mA.
A. Input connector for current measurements up to 10 A
(20 A for 30 seconds).
Measurements above 10 A are possible with the follow-
ing restrictions:
The maximum measurable current is 20 A.
Limit measurements above 10 A to 30 seconds.
CAUTION.
to 20 A) to 30 seconds and allow two minutes of
cooling between measurements.
Do not connect to circuits with >600 V.
DMM912/914/916
Limit large current measurements (10
1–19