Joyello JL-1001 Mode D'emploi page 10

GB
2. Sitting down, release one side of the head support. Unbuckle the side
opening and detach Velcro fasteners. Carefully slide baby into the carrier
through the opening and hold baby against you. Make sure that each of
baby's legs is securely in it's own opening and baby's arms are through the
armholes. (The bigger baby's arm can rest comfortably on the sides of the
head support).
3. Fasten buckles over Velcro side opening, and pull on the end of webbing
strap to adjust fit. Leg opening must be adjusted to the smallest possible
size.
4. While supporting baby's weight with one hand, fasten the head support
buckles. Before releasing your hold on the baby, ensure that the buckles
are securely fastened.
PUTTING BABY IN-FACING OUT
• When your baby can fully support his or her own head, it is time to explore!
Facing-out position lets the baby have the best of both the world-being held
by you and checking out the things that are going on all around you.
1. Put the carrier on your body, fasten the chest buckles on your back (if this
is difficult for you, please ask someone for help). And fasten the buckles at
both sides of the carrier.
2. Sitting down, release one side of the head support. Unbuckle the side
opening and detach Velcro fasteners. Carefully slide baby into the carrier
through the opening making him or her face away from you.
10