Linksys MAX-STREAM RE7350 Guide D'utilisation page 18

a) Enter the PIN from the client device in the field on the range extender's WPS
screen.
b) Click Register on the range extender's WPS screen. The light on the front of
the range extender blink until pairing is complete.
c) Click OK on the range extender's WPS screen within two minutes or you will
have to start over.
3. Connecting with the extender's PIN
a)
On the client device, enter the PIN listed on the range extender's WPS screen.
(It is also listed on the product label on the back of the range extender.)
b)
Click OK on the client device's WPS screen within two minutes.
18