OPERATION
Temperature
setting
1 When you touch the temperature
C
selection
and slide from
settingtohighersetting, the
pertinent temperature indicator
LED lights up and flickers, the per-
tinent temperature indicator LED
lights up bright when the required
temperature of the straightening
plates is reached.
2When you touch the tempera-
ture selection
highersettingtolowerset-
ting, the pertinent temperature
indicator LED lights up and flickers,
the pertinent temperature indicator
LED lights up bright when the re-
quired temperature of the straight-
ening plates is reached.
Ionicfunction
Press the On/Off button
ionic function will start working.
2 4 ENGLISH
_______________________
lower
C
and slide from
G
. The
Locksetting
Press the button lock
7
seconds, the power indicator LED
F
will show orange color, and
then when you touch the decora-
tion plate and slide, the tempera-
ture setting will not work. If you
press the button lock
power indicator LED
off.
Straighteninghair
1
Comb or brush out a section of
your hair about 3 cm wide.
2Place the section of hair between
the plates
A
line as you can, and then close
them.
Caution
Do not touch the plates as they are
7
very hot.
3Guide the plates in a careful,
smooth movement away from the
head to the end of the section of
hair.
Notes
Repeat the procedure section by
7
section.
If you have thick hair, you might
7
have to repeat this procedure on
the same section several times.
H
for 2-3
H
again, the
will shut
F
as close to the hair