Gree GDN20BD-K5EBA1A Mode D'emploi page 10

4
Humidity Button
Press Humidity button to set your required humidity. If hold Humidity
button, humidity can be set in 10% increment among 30%-80% circularly.
After that, the set humidity will be displayed for 5s.
5
Mode Button
Press Mode button can set 4 kinds of dehumidify mode - Smart, Cont.,
Quiet and Dry.
● If smart indicator is on, it indicates the unit enters into smart mode. The
unit will intelligently select the comfortable humidity for human according
to current temperature.
● If cont indicator is on, it indicates the unit enter into continuous dehumidify
mode. The unit will always dehumidify only until the humidity is decreased
to the inapplicable humidity of human.
● If the quiet indicator is on, the unit enter into quiet mode. The unit will
intelligently select the comfortable humidity for human according to current
temperature. The unit will operate at the fan speed whose noise is the
lowest. The fan speed can't be adjusted.
● If the dry indicator is on, the unit enters into dry mode. After clothes are
dried, room humidity will be kept at certain range to prevent mildew. Under
dry mode, fan speed and humidity can't be adjusted.
Note:
● Under smart mode and quiet mode, if room humidity is lower than set
humidity, or lower than the defaulted comfortable temperature, the unit will
stop dehumidifying.
● Under dry mode and cont mode, the humidity can't be adjusted. Under dry
mode and quiet mode, fan speed can't be adjusted.
6
Wind Direc Button
When swing of horizontal louver is needed, press Wind Direc button to
select swing or fixed angle. When Swing light of Wind Direc indicator is on,
the horizontal louver begins to swing; when Fixed Angle light is on, the
horizontal louver stays at current position.
7