Protocol: Wireless Solution W-DMX
•
Refer to the OEM User's manual for general recommendations
•
and use of the transmitter: http://www.wirelessdmx.com
The antenna must be clearly visible from the transmitter
•
See 4.9.2 for activation
•
Do not connect a DMX IN data cable in case of wireless DMX
•
use
In case of protocol errors, the wireless DMX is automatically
•
deactivated. To activate the wireless DMX again, disconnect the
DMX IN data cable, and then switch the unit off and on.
DMX mode:
The first unit receives the DMX signal via the wireless network, then all the other units are
connected to the first one via DMX data cable.
3.3
Accessories
3.3.1
Front filter holder
Step 1
Wireless DMX option
TM
Maximum:
32 units
Step 2
EN -8-
EN